India is a country with not only great population, but also rich stone. A good variety of famous granite in China markets are imported from India, like TAN BROWN, RUBY RED, BLACK GALAXY and etc. India stone is of superb quality, best known for its strength. India stone quality can even meet the high...

Pakistan has pretty rich natural stones. According to the data released by its Industrial Department in 2012, Pakistan enjoys total amount of 297000 million tons of marble and granite of 70 varieties. With 1225 quarries and 2000+ stone factories all around the country, Pakistan lives  up to its...

What do you want to know about Diamond Wire Saw Cutting for Concrete The hardness and density of the construction concrete are both lower than stone, but there is steel inside, most of which diameter can hit 20-30mm. So we need diamond wire saw of better cutting performance for the reinforced concre...

What problems you met in Diamond Wire Saw Cutting? Problem 1: If the fixation wears too much with the adjacent sintered beads, the over-worn fixation should be replaced timely in case of accident caused by sudden breakage of the diamond wire saw. This will help shorten the down time. Problem 2: If t...

In quarry opening, line speed of diamond wire saw will reduce as the cutting area and the hardness of the stone material grows. For hard stone material and great cutting areas, low line speed should be set. For cutting soft marble, line speed 38-40m/s is suggested. For mining soft granite, line spee...

What to do if cutting deviates? Make sure diamond saw blade is tightly locked; Check with a ruler if saw blade is flat or not; Make sure saw blade diamond has been opened; Make sure flange diameter perfectly matches blade diameter; Make sure all segments are in parallel arrangement; Make sure the ax...

Specification of the diamond wire saw usually refers to the diameter/quantity of the beads and the length of the metal wire. -Bead diameter Bead diameter depends on the material cutting. For marble quarry, squaring and cutting, dia 10-11mm is suggested. For granite quarry, squaring and cutting, dia ...

Generally speaking, we conduct two ways of cutting for quarry opening, one is horizontal cutting, the other vertical cutting. Different way of cutting asks for different way of adding cooling water. For horizontal cutting, we usually need to arrange 3-4 places for adding cooling water, taking cuttin...